Important Message About Order Status, Shipping Delays and Customer Service
LEARN MORE
Discontinued
Axial -
Item No.
AXIC9038
1/8 Yeti XL 4WD Kit
Quick Links
Key Features
- Chassis: Composite plastic with integrated upper and lower aluminum braces for greater stiffness, multiple upper link positions to adjust anti-squat
- Drive: Four wheel shaft, AR60XL OCP solid rear axle, WB XL CVJ rear driveshaft with captured cross pin design-no set screws to lose front CVJ metal universals, adjustable steel turnbuckles
- Shocks: Icon Vehicle Dynamics threaded aluminum Big Bore 16, dual rate springs
- Steering: Dual shear rack
- Transmission: All metal gears, full ball bearings, single speed with high gear installed
- Slipper Clutch: Dual slipper design with aluminum pad on each side of 32P spur gear for right amount of slip, and heat resistance
- Roll Cage: Y-480 flexible plastic, resembles welded steel tubes
- Receiver Box: Waterproof, with three silicone seals (electronics not included)
- Weight Box: Black plastic, styled to resemble a scale fuel cell, may be used as an additional electronics box
- Tires: Oficially licensed 3.8" (96mm) Falken WildPeak M/T S30 compound
- Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm) diameter, 17mm hexes
- Front Suspension: Independent, maintains high-speed stability and travel direction when encountering the roughest of terrain
- Rear Suspension: 4-linked Long travel sway bar (medium 3.4mm), 3mm aluminum lower link plates
- Body: Clear polycarbonate .040" (1mm) thick, with interior tray, three driver helmets, decals, spare wheel and tire
Video Overview
Needed to Complete
- 2-channel radio
- Metal gear, high-torque steering servo
- 1/8 scale brushless 4-pole Power System
- Two 2S or 3S LiPo Packs with connector to match ESC, 25C minimum discharge rating
- Suitable Charger
- Four AA Batteries for Transmitter
- LiPo charge bag, maintenance and trail equipment
What's in the box?
- (1) 4WD Yeti XL Rock Racer Kit with Body, Tires, Wheels, Shocks, Decals 3 Driver Helmets, Interior Tray, Spare Wheel and Tire
- (1) User Manual
Specifications
- Length: 18.1" (460mm)
- Width: 8.8" (225mm)
- Height: 9.0" (229mm)
- Wheelbase: 12.0" (305mm), optional link kit allows wheelbase adjustment to either a 11.4" 12.0" or 12.3" wheelbase
- Ground Clearance: 2.7" (68mm)
- Weight: 4.65lbs (2.1kg) approximately, with electronics
- Optimized Gear Ratio: 3.75:1
- Final Drive Ratio (FDR): 42.00, stock (33.69-54.15 with different spur/pinion gear combinations, extra spur and pinion gears must be purchased separately)
- Adjustable Battery Tray Dimensions: 5.75 x 1.2" (147 x 32mm)
- Length: 17.5" (444mm)
- Width: 6.25" (159mm)
- Height: 6.4" (162mm) bottom of body to top of roll cage 3.3" (84mm) bottom of body to top of driver's door
PRODUCT SPECS
Inner Tire / Outer Wheel Diameter
3.8 in (96mm)
Product Width
16.3 in (414mm)
Power Type
Electric
Gear Pitch
32-Pitch
Product Length
25.8 in (654mm)
Ground Clearance
2.48 in (63mm)
Completion Level
Kit
Drivetrain
4WD
Product Height
11.1 in (282mm)
Wheel Hex Size
17mm
Body
Clear
Scale
1/8
Wheelbase
18.5 in (470mm)
Shock Type
Aluminum
Product Weight
12.75 lb (5.78 kg)
Vehicle Type
Buggy
Water-Resistant
Yes