AXIAL PRODUCT SUPPORT & SERVICE
Click on the title below to learn more. Need your product serviced? Click here to visit our Service Center.
- Included Transmitter and Receiver
Required Items
Brad shows us how to bind your Axial SCX24
- No items required
Required Items
Brad shares key features about the New 2-in-1 unit (HRZ00015) and 4ch transmitter(HRZ0001) for your Axial SCX24
- 0.05mm Hex Wrench
- Needle Nose Pliers
Required Items
Brad shows us how to switch out the steering servo in your Axial SCX24
- Double sided tape
Required Items
Brad shows us how to switch out your ESC/RX in your Axial SCX24
- 0.05mm Hex Wrench
- 1.5mm Hex Wrench
- 4mm Nut Driver
Required Items
Brad shows us how to replace the motor in your Axial SCX24
- N/A
Required Items
Brad shows us different wheel options and what to look for
- Body Reamer
- 1.5mm Hex Wrench
- 2.0mm Hex Wrench
- Magic Marker
- Scotch Tape
Tools Needed
Brad shows us how to install a led light bar on your Axial SCX6
- Your DX5c or DX5 Rugged
Tools Needed
Brad shows us how to bind/program the Axial Carpa 4WS using a DX5c or DX5 Rugged
- Your DX5 Pro
- Optional 3D Printable Thumb-Steering Control Knob
Tools Needed
Brad shows us how to bind/program the Axial Capra 4WS using the DX5pro
- Channel Locks
- 8mm Nut Driver
- 2.0 Hex Wrench
- 2.5 Hex Wrench
- 3mm Hex Wrench
Tools Needed
Brad shows us how to set the endpoints on the two speed servo in the AXIAL SCX6.
- Compatible LiPo Battery
- Your Transmitter
Tools Needed
Brad shows us how to set the endpoints on the two speed servo in the AXIAL SCX6.
- Compatible LiPo Battery
- Your Transmitter
Tools Needed
Brad shows us how to calibrate the Firma 120Amp esc in the AXIAL SCX6.
- 10mm Nut Driver
- Battery Mount with Straps and Hardware
Tools Needed
Brad shows us general tips about your Axial SCX6
- 2.5mm Hex Wrench
- 2.0mm Hex Wrench
- Loctite Threadlocker
- 1/5 Scale Servo
- Included Accessory Bag with Your SCX6
Tools Needed
Brad shows us how to install a 1/5 scale servo into your Axial SCX6
- 2.5mm Hex Hex
- 10mm Wheel Wrench
- King Shock Collars
- King Lower Shock Caps
- King Shock Caps
Tools Needed
Brad shows us how to convert your stock shocks into replica King shocks on your Axial SCX6
- No tools needed
Tools Needed
Brad shows us tips on installing our SCX10III RTR Body
- 1.5mm Hex Wrench
Tools Needed
Brad shows us how to install rock lights
- 1.5mm Hex Wrench
- 2.0mm Hex Wrench
- Side Cutters
- Hobby Knife
Tools Needed
Brad shows us how to install the light bar
- 1.5mm Hex Wrench
- 2.0mm Wrench
- Side Cutters
- Hobby Knife
Tools Needed
Brad shows us how to install bucket lights
- 1.5mm Hew Wrench
- 2.0mm Hew Wrench
- 2.5mm Hex Wrench
- 8.0mm Nut Drive/Wheel Wrench
- Flathead Screw Driver
- Pliers
Tools Needed
Brad shows us how to open the Diffs
- 1.5mm Hew Wrench
- 2.0mm Hew Wrench
- 2.5mm Hex Wrench
- 8.0mm Nut Drive/Wheel Wrench
- Flathead Screw Driver
- Pliers
Tools Needed
Brad shows us how to replace the axles
- 2.0mm Hew Wrench
Tools Needed
Brad shows us how to replace the RYFT servo
- 2.0mm Hew Wrench
Tools Needed
Brad shows us how to Bind and Calibrate
- 2.0mm Hew Wrench
Tools Needed
Brad shows us how to Access the Receiver Box
- Pans
- Dye
- Towels
- Tongs
- Protecive Clothing
Tools Needed
Brad shows us how to dye parts
- 2.0mm Hex Wrench
- Needle Nose Pliers
Tools Needed
Brad shows us how to install a servo saver
- 2.0mm Hex Wrench
Tools Needed
Brad shows us how to mount an aftermarket body
- 2.0mm Hex Wrench
- 2.5mm Hex Wrench
- Needle Nose Pliers
Tools Needed
Brad shows us how to install a Two-speed tranny
- 2.0mm Hex Wrench
Tools Needed
Brad shows us how to adjust the Dig Servo
If you have any technical questions about your Horizon Hobby product, most of the answers you’re looking for can be found in the ‘Manuals & Support’ tab of its horizonhobby.com product page. To find the page for your product, enter the product name or item number in the search field at the top of this page.
